Worktop replacement in Brent Cross

Yes. Brent Cross is on the patch, and the postcodes we work here are NW4, NW2. It is worked on our north London run, along with the rest of Barnet. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The road network is the job risk here, so slot deliveries outside retail peak times or the van sits in traffic with a slab strapped to it.

Dominated by the North Circular, the flyover and the shopping centre service roads, so timing matters more than distance and a badly chosen hour can add an hour. New blocks have formal loading docks and lift bookings. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition.