Worktop templating in Burnt Oak

Yes. Burnt Oak is on the patch, and the postcodes we work here are HA8. It is worked on our north London run, along with the rest of Barnet. Bay bookings are usually an hour or two, which is fine for unloading and no use at all as a place to leave the van for a day. It is noted on the job sheet at template so the fitting crew inherit the answer rather than rediscovering it. Two hours is the realistic figure. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Carcass heights are read individually, since legs bottoming out on concrete mean the units do not share one plane. Two to three hours, once the units are in. The original larder alcove often leaves a shallow recess in the run, and that recess needs its own templated return rather than being packed out with a filler.

Estate roads with front gardens, few original driveways and heavy on-street parking, so most jobs are a kerb-to-front-door carry across a path. The Edgware Road frontage has loading restrictions and constant traffic. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Two to three hours on site, with the sink, tap and hob physically present. Units fitted, fixed and level first.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. The drawing leaves site complete. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Plotted, not estimated. Every base unit fixed to the wall, packed and levelled, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.