Stone worktops in Camden Town

Yes. Camden Town is on the patch, and the postcodes we work here are NW1. It is worked on our central and north London run, along with the rest of Camden. The van is not staying on a main road for the day, so once the stone is off it goes and parks properly somewhere else. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. Cutting is done wet and extracted, never dry on a pavement. There is nothing to drive to and nothing to pick up, because both visits are to the property itself.

Winders at the head of each flight are the tightest part of the climb and they are appreciably tighter than the straight run below them. The kitchen in one of these sits in the back addition and takes its daylight from one end, so the working half of the run is the darker half and a pale stone with a honed or matt face does more there than any colour with depth in it. Honed hides the dust an older house makes all year. Sill height gets settled with the template on site, because it is one of the few dimensions nobody has measured before we arrive. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Brittle stone and narrow returns are a poor pairing.

A steep pitch shortens the tread and lengthens the reach, which leaves whoever is below carrying most of the weight for the full flight. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. The protective film peels off last so the finish is untouched. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Remnants become chopping boards, hearths and window boards.

A doorway partway along one wall breaks that side into two separate pieces, and two short pieces cost more between them than the single long one they replace. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. An overhang is stone and steel priced together, never stone alone. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

A window board sitting below finished worktop height leaves two choices, drop the top under it or notch the stone around it, and both cost more than a straight run. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. What the room obstructs, the layout pays for in slab. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Hard use by people who did not choose it points at sintered stone.

An island is where this usually shows, standing free with no wall to level against. A long top on units that were shimmed once and never checked is the commonest version of this, and it is cheap to fix beforehand. Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. A cill projecting forward of the plaster line pushes the back edge out, and the units then stand off the wall by that amount for the whole length. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. A cut-out beside a notch leaves very little stone in between.

A seal is not waterproofing. It only buys time to wipe a spill up. Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Granite is porous to varying degrees, so it is sealed when we fit it and topped up over the life of the worktop. Ceilings in the principal rooms are three metres or more, so a full-height panel behind a hob is a taller piece here than the same kitchen would need anywhere else. Rooms in these houses run long and narrow with the only honest daylight at the garden end, so a pale honed surface does more for the working half of the kitchen than any colour with depth in it. Side light flatters movement and wastes a flat colour.

Nothing is payable in advance of the template. The fit follows 5 to 10 working days after the template, and nothing is cut before that visit because nothing is cut from a plan. Between the template and the fit the slab is nested, cut, mitred and dry-assembled on the bench, which is work you never see and is most of the wait. A hundred and forty years of alterations sit under the current kitchen, and the worktop is what has to sit flat on top of all of it. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. What sings in a bright room can go dead in a dark one.

Most breakages happen on the carry, which is why the route is walked and measured before anything comes off the van. A remake goes back through the same cutting and polishing, so it is a return visit rather than a patch. The rest of the kitchen still goes in. One damaged piece does not hold up the pieces either side. Where the stairwell is narrow enough that the stone travels on edge the polished face runs within an inch of the plaster, so the walls get boarded as well as the steps. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. A remnant worth keeping rides back on the van rather than to a skip.