Kitchen worktops in Chelsfield

Yes. The private-estate side has genuinely large kitchens with double islands or an island plus a separate prep run, walk-in pantries and butler sinks; the village end is much smaller period stock with kitchens in single-storey rear additions. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. The load plan follows from it.

Chelsfield Park large detached, 1930s detached on large plot, village cottage and 1960s detached. A range or an Aga in an original recess is usually immovable, so the run is designed around it and the clearances come from the appliance. If the island top is a few hundred millimetres longer than the usable length of a slab, you buy a second slab to gain that overhang, the whole slab, not the part you use, and that is a material decision worth more than any other line on the quote. That is what the itemised lines are for.

Unadopted private roads with poor surfaces, no pavements and gravel or shingle drives, plus a rail bridge and narrow lanes on the approach that rule out anything longer than a transit. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. That is why the fitting line on a quote reflects manpower and time rather than square metres. It appears as its own line rather than buried in a rate.

Worktop design & quotation, worktop fabrication and worktop installation, in that order. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Unmade private roads here shake a loaded van, so slabs travel on edge in a proper frame rather than laid flat, and we scout the route before the delivery day.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.