Worktop installation in Cubitt Town

Yes. Cubitt Town is on the patch, and the postcodes we work here are E14. It is worked on our east London run, along with the rest of Tower Hamlets. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A riverside block is a managed building with a booked goods lift, a loading bay and a concierge, and all three have to line up on the same day. The lift is measured before the piece is loaded, and once inside the flat the fitting is quick by comparison. Walked, measured, protected, then lifted. Houses here allow a single-piece run straight through the front door, which is worth taking advantage of instead of defaulting to a joint.

This is the easiest part of the peninsula for a van, with off-street parking and driveways on many of the 1980s houses and level access to the front door. Riverside blocks are the exception, with gated courtyards and lifts sized for furniture rather than 3m slabs. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop design & quotation. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a partition has been built off the floor screed rather than off the slab, it moves, and a mitre bonded across that corner is the first thing to open. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.