Worktop installation in East Ham

Yes. East Ham is on the patch, and the postcodes we work here are E6. It is worked on our east London run, along with the rest of Newham. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Cottage terraces have no hall to speak of and the front door opens almost straight into the room, which makes the carry easier and the protection harder. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. The slow parts are slow for a reason. Extended kitchens here regularly need a three-piece top with two joints, and the joints want to land away from the sink and hob cut-outs.

Long straight residential roads with permit bays and some crossovers, so you can generally get a van reasonably close, but side alleys between the houses are gated and often too narrow to pass a 700mm slab on the flat. Where there is no side access the piece comes through the front door and the hallway dogleg. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. None of it is worked out on the doorstep.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop design & quotation. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.