Worktop fabrication in Golden Lane

Yes. Golden Lane is on the patch, and the postcodes we work here are EC1Y. It is worked on our the City run, along with the rest of the Square Mile. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These are built in dense concrete, so support for a peninsula or an end panel goes in with proper anchors rather than plugs. The notch around a boxed stack is machined with a radius, because a square internal corner there is where a top fails. The bench proves it before the van moves. Measure the unit depth rather than assuming 600mm - a lot of these kitchens are shallower, and a standard-depth top will foul the opposite wall in a 1.8m room.

Deliveries come off narrow surrounding streets with almost no loading provision, then through a courtyard on foot to a single lift per core - and the lift cars are genuinely small, so a slab may need to go up the stairs instead. The estate is listed, so nothing gets propped, taped or fixed to walls and finishes along the route. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. So the nesting is worked to the measured route first and to the slab second. It is settled on the bench, not on site.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. So the nesting is planned around it rather than around a standard kitchen. Nested for the job in front of us. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Same slab run, or it is not a match.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. A join that lands in the wrong place cannot be moved once the cut-outs are machined, so it is settled on the drawing. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. The drawing decides it, not the fitter. The stack boxing needs to be in its final form and the sink and hob on site before we machine, since a boxing that gets re-clad afterwards throws the notch out. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. Changes cost a piece, not a tweak.