Worktop installation in Hampton Wick

Yes. Hampton Wick is on the patch, and the postcodes we work here are KT1. It is worked on our south west London run, along with the rest of Richmond upon Thames. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A small room puts the sink, hob and tap cut-outs close together on one short length, and the bridge of stone left between them decides whether it can be cut in one piece. The day is planned backwards from the hall. That is the shape of the day. Doors opening straight onto the street mean the slab goes from tailgate to threshold in one move, so the van has to be right at the door or the job stalls.

The village sits at the foot of Kingston Bridge, so traffic queues through it most of the day, the streets are narrow with residents' bays, and many cottages open straight onto the pavement with no front garden to stage the load in. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.