Worktop replacement in Harrow Weald

Yes. Harrow Weald is on the patch, and the postcodes we work here are HA3. It is worked on our north west London run, along with the rest of Harrow. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. Access out counts as much as access in. We come to the kitchen to template and again to fit, so there is nothing to visit and nothing to collect.

Downstairs the hall and dining room are boarded but the kitchen was laid solid from the start, so the room sits on a different construction from the one beside it. The kitchen is normally the original back room with a later side-return or rear extension bolted on, and that helps us: most pieces can go down the side alley and in through the back door in one length, so we can avoid joins that a front-door route would force. Whatever the shell has done since is dealt with now. Casement handles and stays swing down into the space above the worktop, so the clearance that counts is the one measured with the window open. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The old carcasses are rarely level and never were.

The step and the gap at the car threshold catch a trolley wheel, so the piece comes off the trolley and goes in by hand. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. Nothing new comes down a hall still full of old top. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Waste needs a space of its own and the street rarely offers one.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation. That is a point about the buildings round here, not about the job. The quoting, the cutting and the fitting are identical here to anywhere else we work. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The carcasses have to be sound, because stone is several times the weight of what is coming off. Between tenancies is the only window there is. Extension work runs late far more often than it runs early, and the worktop is close to the last thing in, so the date agreed at the start is rarely the date that happens. Old tops out in the morning, new stone down and sealed the same afternoon. One plot replaced years on, matched or otherwise.

Island units are rarely fixed to anything at first fix, so they get screwed to the floor and levelled against the perimeter run before the stone is measured at all. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Joins move onto the gables this time round. The supply-only figure for material runs £110 to £550 per square metre, and templating, fabrication and fitting are lines of their own.

A low sill over the sink run is what decides between an upstand and stone dying into a window board, and there is often less clearance than an upstand is tall. We would rather find it at template than on the morning, which is why the templater looks behind the units. A filler strip is evidence, not decoration. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. Because the money comes out of a household rather than a maintenance budget, phasing is common: tops now, island or splashbacks later, quoted so the second visit still matches the first. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Strip-out and fit inside one access window.

Grooves and an undermounted bowl are usually specified together, since the grooves are run to the bowl edge. A groove set needs a clear stretch of worktop beside the bowl, so it competes with the run for length instead of being free surface. Where there is no room for a separate drainer, grooves are usually what gets specified instead. Ceilings are lath and plaster at the front and plasterboard in the extension, and the join between the two marks where the original back wall stood. The units stay and only the surface changes, so the job is a day, and what makes it a difficult day is the building. A thicker top changes what clears the top drawer.

Upkeep is settled when the slab is chosen, since it belongs to the material rather than the fabrication. A seal is not waterproofing. It only buys time to wipe a spill up. Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Deep timber window boards were fitted throughout and they stand proud of the plaster, so a top reaching the window meets a stepped edge rather than a flat one. What catches people out is the junction between the old floor and the extension floor, which is rarely at the same level, so a run carrying across it needs the units packed before stone goes on. Plaster comes away with the old upstands more often than not.

Two kitchens the same length can be far apart, because material, edge and cut-outs move independently of size. Material is quoted supply only and templating, fabrication and fitting sit on their own lines, so it is visible which part is stone and which is labour. Plumbing, gas and electrical work are not in the figure, because we do not do them. Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. A laminate top was scribed thin at the back to swallow it, and stone cannot be shaved down the same way. The stack was boxed in after the kitchen went in.

The workmanship guarantee runs 5 years on every kitchen we fit. A remade piece is cut from the same slab run wherever the slab allows, because a replacement from another batch will not match across a join. A dropped pan years later is a different question, and stone is remade rather than filled either way. Where a basement car park is the only way up from the parking level the carry starts below ground, and two lifts in one building rarely share the same internal dimensions. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The route is protected once and then used four times.