Worktop replacement in Kenton

Yes. Kenton is on the patch, and the postcodes we work here are HA3, HA9. It is worked on our north west London run, along with the rest of Harrow. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Solid brick with a render coat is firm to work against and out of plumb, so the scribe at worktop height is different from the one at plinth level. The junction between the old floor and the extension floor is where a run crossing it needs packing before stone goes on. Units kept, surface changed, one day. Runs over 4m mean planning the joint around the hob and the sink so the seam falls where it will not sit in standing water.

Wide straight roads, drives on most houses and reliable side access down 900mm alleys, so slabs commonly go straight to the rear. Kenton Road itself is a busy through route where kerbside stopping is awkward at peak times. The side passage is the measurement that matters, because a piece has to be carried flat down it and then turned in at the back door, and the turn is always tighter than the passage. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. It sets what the day actually looks like.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A second kitchen or a kitchenette in an annexe is a small job with the same fixed template, fabrication and fitting lines as a large one. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project. Extended households run kitchens hard, and that pushes the specification towards granite or sintered stone rather than a light quartz. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.