Worktop fabrication in Monks Orchard

Yes. Monks Orchard is on the patch, and the postcodes we work here are CR0, BR3. It is worked on our south London run, along with the rest of Croydon. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The internal stair is usually a straight flight with a tight top landing, and it is the landing rather than the flight that is the limit. Walls in the system-built blocks are concrete or panel and can bow noticeably over the length of a run, so the template picks up the real line and we cut the back edge to follow it rather than trimming on site with a grinder. Every join over a gable, clear of every cut-out. Parking courts on the newer schemes mean a 40-metre carry with a corner, so the pieces get sized for two people rather than four.

Cul-de-sacs and turning heads make loading straightforward, though several of the newer schemes have parking courts behind the houses and bollards that stop a van reaching the front door. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. So the nesting is worked to the measured route first and to the slab second. It is settled on the bench, not on site.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Pieces are dry-assembled and checked on the bench before anything is loaded. Same slab run, or it is not a match. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. So the nesting is planned around it rather than around a standard kitchen. Nested for the job in front of us.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The template drawing carries the real geometry through to the saw, and the piece is machined to it rather than trimmed to it later. Radiused, polished, and clear of the joins. The stack boxing needs to be in its final form and the sink and hob on site before we machine, since a boxing that gets re-clad afterwards throws the notch out. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. Changing an appliance after the nest is set means recutting the piece, not adjusting it. The approved drawing is the instruction.