Stone worktops in Motspur Park

Yes. Motspur Park is on the patch, and the postcodes we work here are KT3, SW20. It is worked on our south west London run, along with the rest of Merton. Deep gravel takes the wheels of a loaded trolley and holds them, so either boards go down or the pieces are carried. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. The film stays on the face until the last trade leaves. The work comes to you. We template in your kitchen and fit in your kitchen, with nothing to visit or collect.

The boiler has usually been moved out to the garage or the utility, leaving a capped flue and a run of dead pipework in the kitchen wall. Side light from the garden is what lets a stone with movement in it actually be seen, which is why a busier granite or a veined quartz earns its keep here and a flat single colour rarely does. Save on the colour before you save on the thickness. A wall line that runs level over a floor that does not means the finish closes up on the plinth at one end, which is joinery rather than something the stone can answer. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. An engineered surface yellows under standing warmth; natural stone does not.

Where the van stands level with the front of the house a piece gets handled twice instead of five times, and stone breaks on handling rather than on the road. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Where a break is unavoidable it goes into the quietest part of the pattern. Block paving bedded on sand can rut under a fully loaded van, and that is said to the customer beforehand rather than explained afterwards. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Four quartz samples arrive by post, well before anything else does.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Finished ends cost by the metre, however short the run is. The stone is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted separately.

Where two pieces meet over a fall in the floor the join has to be flush to the hand as well as true to the level, because the eye reads the join and forgives the room. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Strong daylight is an argument for a surface built to take it. Confirm the depth of the units, the total run lengths and whether an island or peninsula is going in, and tell us the colour temperature of the lighting. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. One stone across a portfolio is worth more than a small saving.

The template can be taken with the old top still down, which is why one visit covers both. On a replacement the old top comes off in the morning and the new stone is down and sealed the same day. What comes out goes by the same route the new stone comes in by, which is why that route is walked before anything is lifted. Where the drive is shared, the half-hour the van spends in the way is agreed with the neighbour in advance rather than apologised for at the time. Sintered surfaces are the hardest of the three to machine and the messiest to cut wet, which is precisely why none of that happens on a public pavement. Pieces are unloaded in laying order so the figure runs true.

No maintenance visit is built into the job. Soap, water, and on the porous stones a seal. Quartz and sintered stone never need sealing: quartz is non-porous and sintered stone has effectively zero porosity. Topping a seal up is a wipe-on job with a cloth. Air bricks that once ventilated the original floor now open into the extension, and one of them is generally sitting behind a base unit. These rooms take good side light from the garden, which flatters a stone with movement in it and is largely wasted on a flat single colour. Two slabs change the question from price to preference.

Join count and position are settled from the template drawing rather than improvised on the fitting day. There are only ever a few legal positions, and the one taken is furthest from the light. What you get is a line rather than a step, because the pieces are levelled to each other first. If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. An island is the piece that decides whether one slab covers the kitchen or two, and a second slab arrives as a step in the figure rather than a gentle slope. Cut-outs take material out of the piece that carries the sink.

A dropped pan years later is a different question, and stone is remade rather than filled either way. Stone cannot be filled and made good the way laminate can, so a damaged piece is remade rather than patched. A piece is never laid flat across a gap while it is moved, because that is how stone cracks unaided. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Pattern is carried across a seam on the bench, never by eye on site.