Worktop replacement in Willesden Green

Yes. Willesden Green is on the patch, and the postcodes we work here are NW2, NW10. It is worked on our north west London run, along with the rest of Brent. A step up from the drive to the threshold turns the last two metres into a lift, and a lift is where two pairs of hands become the minimum. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Both loads want the same few metres of kerb. Your part of it happens entirely at home, with nothing to travel to and nothing to bring back.

The outrigger shares a party wall with the addition next door for its whole length, so one long side of the kitchen is solid brick with another kitchen on the far side of it. In most Victorian terraces the kitchen sits in the back addition, so you get a narrow galley with one outside wall and nothing square to work off. Plaster comes away with the old upstands more often than not. A floor that falls across the depth of a run rather than along it tips the carcasses front to back, and packing the front feet changes the overhang while it fixes the level. This is the commonest reason a replacement turns out to need more than a straight swap. What passed for a fit in chipboard will not pass in stone.

Rear access usually lets us fit longer pieces whole, so the join count ends up decided by the slab rather than by the building. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it. Where the van cannot turn on the plot it has to arrive already facing the right way, so the approach along the street is part of the plan. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. Half a day of parking buys half a job.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop installation. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. Extension work runs late far more often than it runs early, and the worktop is close to the last thing in, so the date agreed at the start is rarely the date that happens. The carcasses have to be sound, because stone is several times the weight of what is coming off. The doors are staying, so the colour answers to them. Where a family has been living around a building site for months, the finish date carries more weight than any other part of the specification. Old tops out in the morning, new stone down and sealed the same afternoon. Between tenancies is the only window there is.

Three stools along one side need more clear length than most plans allow, and once the seating depth is fixed the piece either grows or it loses a seat. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. A corner that was butted can be mitred this time. The stone is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted separately.

Once the carcasses are levelled the gap under the plinth varies along the run, and that varying gap is the honest record of what the floor is doing. We would rather find it at template than on the morning, which is why the templater looks behind the units. Taking the top off is what exposes the floor. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Notice goes out before the crew is booked.

An island is where this usually shows, standing free with no wall to level against. Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. Units have to be fixed down as well as levelled. A loose carcass moves under stone. A wall line that runs level over a floor that does not means the finish closes up on the plinth at one end, which is joinery rather than something the stone can answer. A laminate top was scribed thin at the back to swallow it, and stone cannot be shaved down the same way. The old cut-out was hiding the notch you now need.

A remade piece is cut from the same slab run wherever the slab allows, because a replacement from another batch will not match across a join. Stone cannot be filled and made good the way laminate can, so a damaged piece is remade rather than patched. The workmanship guarantee runs 5 years on every kitchen we fit. Garden routes carry their own hazards: a drain cover, a step up to a patio, wet decking, or a lawn that will not take a loaded trolley. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. It sets what the day actually looks like.

We seat and seal the sink and hob on the day; water, waste, gas and electrics are for your plumber and electrician. Each cut-out is priced on its own line, so a range, a bowl and a half, a boiling tap and a drainer are four items rather than one. Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. Where an overhang is too deep for steel on its own the choice is a leg at the end or a bracket underneath, and a bracket that lands where a knee goes is worse than no bracket at all. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Old runs are rarely square, and stone will not forgive it.

A full-height piece shows a wall that is out more than an upstand does, over the extra height. Stone up a wall is heavier than tile and bonded rather than hung, so the wall has to be sound. A full-height piece behind the hob has to allow for the extractor, so that gets settled first. A soil stack is strapped to the outside of the addition wall and its branch comes through low, which settles where the sink can go before any layout is drawn. What the old top has been hiding is usually a floor that settled towards the back and units that were never fixed back to the wall. The building has kept moving; the new template catches up.