Splashbacks and upstands in Wood Street

Yes. Wood Street is on the patch, and the postcodes we work here are E17. It is worked on our east London run, along with the rest of Waltham Forest. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. Handling is where these pieces get damaged. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Lease conditions and the other flats in the building decide when noisy work can happen, so the fitting day has a start and a finish that are not ours to set. A 100mm upstand bedded on silicone is the honest answer where the plaster bows, because it rides what a tall panel exposes. The wall makes that decision, not the brochure. The through-room route means every piece has to clear a pair of internal door openings, and 900mm island slabs frequently will not turn at the second one.

The railway splits the area, so streets on either side need approaching separately and the bridge and level crossing points create bottlenecks at peak times. Residential streets are permit-controlled with narrow bays, and terraces have no side access, so the route is front door, hall, through room, kitchen. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. Where the route is tight we break a long splashback at a natural vertical joint instead of forcing one panel through. It decides panel size before anything is cut.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop installation and worktop replacement. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Small kitchens in a shared house are all short runs and tight cut-out spacing, which is more bench work per square metre than one large kitchen would be. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Sockets final before template. A licensed shared house has fire-door and escape-route rules that decide how and when stone can be carried through the common parts. Ordered later from a different batch, the match is not reliable exactly where the pieces meet. Same batch, same run, same day.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Long runs almost never take a single panel, so the joint positions want agreeing before anything is templated. Corners get their own pieces. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. A tall panel that fits at the worktop will stand off the wall at the top unless the wall is dubbed out or the panel is scribed. An upstand rides what a panel exposes. The chimney breast recess must be replastered and fully dry, and the hob and extractor positions fixed, before anyone templates a full-height piece into it. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. A 100mm upstand is the low-maintenance answer, and full-height stone is the one that has to be committed to early. Decided before fabrication, not after.