Worktop templating in Battersea Park

Yes. Battersea Park is on the patch, and the postcodes we work here are SW11. It is run from the New Malden side, covering South West London & Surrey. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The lift is a small passenger car with a gate, and the alternative is a stone stair winding round the shaft with a turn at every half-landing. Anything that has to stay accessible - stopcocks, gas meters, riser access panels - is marked on the template so the stone is cut around it instead of over it. Two to three hours, once the units are in. Peninsulas set into a structural opening need the finished opening measured after the steel is cased, because the casing adds 40 to 60mm each side that the architect's drawing ignores.

Mansion blocks have wide communal stairs but many have no lift or only a small original passenger lift, and porters restrict working hours. Flat entrance doors are often original and narrower than the corridor suggests. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop replacement. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Two to three hours on site, with the sink, tap and hob physically present. Units fitted, fixed and level first. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Two to three hours on site, with the sink, tap and hob physically present. Units fitted, fixed and level first.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. Join positions and vein direction are marked on the template drawing before it leaves site. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A deep scribe comes out of the nest, so how far the stone has to be relieved changes which part of the slab the piece is cut from. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Measured at worktop height, nowhere else. Boxing and riser casings built, cased and finished to their final surface, units fixed and levelled, and building access, lift booking and porter arrangements agreed so both the template visit and the later fit can run. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.