Worktop installation in Brixton

Yes. Brixton is on the patch, and the postcodes we work here are SW9, SW2. It is worked on our south London run, along with the rest of Lambeth. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The bay at the front and the back addition at the rear were built to different standards, and the kitchen is nearly always in the weaker of the two. The day is planned backwards from the hall. That is the shape of the day. Nothing here goes in as one piece, plan a joint at the sink or hob as standard and finish the exposed end with a polished edge because there is rarely a wall to hide it against.

The centre is a red route and bus corridor with market activity all day, so vehicle access effectively means before 9am. Above-shop flats are reached through a shared street door and a single steep flight, and estate blocks need booked lift access with a car too small for full lengths. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.