Worktop design and quotation in Cubitt Town

Yes. Cubitt Town is on the patch, and the postcodes we work here are E14. It is worked on our east London run, along with the rest of Tower Hamlets. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Open-plan living makes the kitchen furniture rather than utility, so the island and the run behind it are nested off the same area of slab. With the room square and the access managed, the material band you choose does most of the work in the total. You see it before you commit to anything. Houses here allow a single-piece run straight through the front door, which is worth taking advantage of instead of defaulting to a joint.

This is the easiest part of the peninsula for a van, with off-street parking and driveways on many of the 1980s houses and level access to the front door. Riverside blocks are the exception, with gated courtyards and lifts sized for furniture rather than 3m slabs. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate.

It is one of the three we do most here, behind worktop installation. Same template visit, same workshop, same installers either way. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A lightweight stud partition will not carry a breakfast bar or a peninsula end, and stone finds that out faster than laminate ever did. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.