Worktop design and quotation in Greenhill

Yes. Greenhill is on the patch, and the postcodes we work here are HA1. It is run from the Watford side, covering Hertfordshire & North London. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Goods access exists because the building had it when it was an office, which usually makes the carry the easiest part of the job. Runs are short enough that a small U or galley often comes out of one slab with good yield, which means the material band you pick (£110-£550/m² supply only) is doing most of the work in the total, not the shape of the room. Priced from the building, not from a rate card. Office conversions have shallow floor-to-ceiling zones and boxed services above the units, so measure the clearance for tilting a slab upright inside the room.

Multi-storey and podium parking with height barriers, controlled loading bays with strict time limits, and goods lifts that need booking through building management. Station Road and College Road restrictions rule out casual kerbside unloading. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. It appears as its own line rather than buried in a rate. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Send photographs of every corner of the room and it gets priced properly first time. Priced as fabrication, not as area. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.