Worktop replacement in High Barnet

Yes. High Barnet is on the patch, and the postcodes we work here are EN5. It is worked on our north London run, along with the rest of Barnet. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Nothing goes out until the route back to the van is clear. There is nothing to drive to and nothing to pick up, because both visits are to the property itself.

Walls are thick, lime-plastered and built in a soft brick, so they take a scribe well and take a fixing badly. In most Victorian terraces the kitchen sits in the back addition, so you get a narrow galley with one outside wall and nothing square to work off. The building has kept moving; the new template catches up. Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. This is the commonest reason a replacement turns out to need more than a straight swap. The stack was boxed in after the kitchen went in.

Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It decides whether the old top leaves whole. A single red line has hours and a double red line does not, and the difference decides whether an early start is a plan or a penalty. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The old tops leave in one movement rather than piece by piece.

Yes. On the research for this patch it is the first of the three jobs listed. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. One plot replaced years on, matched or otherwise. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The carcasses have to be sound, because stone is several times the weight of what is coming off. Shared-house tops take a decade of hard use.

Corner sinks and corner hobs sit exactly where the joint wants to be, so on an L the cut-out positions get settled before the join positions do. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material runs £110 to £550 per square metre supply only, and templating, fabrication and fitting each get their own line.

Sill height gets settled with the template on site, because it is one of the few dimensions nobody has measured before we arrive. We would rather find it at template than on the morning, which is why the templater looks behind the units. A postformed top swallowed the fall. This will not. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Whoever manages the block controls the lift booking, the bin store and the visitor parking, and none of that sits in the gift of the household whose kitchen it is. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. A leaseholder still needs the building to consent.

A mitred join at a corner is a different job from a butt join along a run, and they are not priced the same. There are only ever a few legal positions, and the one taken is furthest from the light. Each join is an item on the drawing, so the layout and the figure move together. One leg of an L is nearly always the working run and the other little more than a landing space, but both are templated, cut and edged to the same standard. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Same shape, different cut list.

The design and quotation visit comes first. It is free and carries no obligation. The fit follows 5 to 10 working days after the template, and nothing is cut before that visit because nothing is cut from a plan. On the fitting day floors and door frames are protected, joins clamped flush, sink and hob sealed. Original quarry tile is often still down under two or three later floor coverings, which is why the finished floor height is rarely what anyone expects. The units stay and only the surface changes, so the job is a day, and what makes it a difficult day is the building. Twenty years of settlement is measured, not argued with.

A seal is not waterproofing. It only buys time to wipe a spill up. Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. Granite tells you when the seal wants topping up: water stops beading on the surface and starts darkening it instead. Rooms are tall with deep window reveals, and a run finishing into a reveal is templated to it rather than assumed square. What the old top has been hiding is usually a floor that settled towards the back and units that were never fixed back to the wall. What is behind the old splashback decides the new one.

The tap and waste have to be disconnected by a plumber before we start and reconnected once the stone is in. Taking the old tops off and disposing of them is its own line on the quote rather than something folded into the stone price. What changes is the surface. The carcasses underneath stay where they are. Where a marked loading box sits on the red route the stop is legal but timed, so the unload runs as one movement with every hand on it. Two loads share the one space here, the old tops waiting to go and the new stone waiting to come in. Where the van must move, the waste goes on first.