Worktop replacement in Mill Hill

Yes. Mill Hill is on the patch, and the postcodes we work here are NW7. It is worked on our north London run, along with the rest of Barnet. On a drive that only takes one vehicle nose-in, the van has to reverse the whole length of it to get back out, which decides which way it goes in. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The van has to stand through both halves of the day. Everything that involves you happens in your kitchen, so there is nothing to visit and nothing to collect.

Lime plaster over rubble moves in and out enough that a single long panel will show a gap somewhere along its length. These are the multi-piece jobs: long runs, a large island and often a range cooker that cannot be moved, so the stone is templated in several pieces and how the vein runs across the joins matters. Tile beds and adhesive come off before the new top goes on. Two alcove pieces will not swap over however similar they look, so they are marked left and right at the bench and stay that way to the van. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day.

Bollards, planters and a one-way service road can turn what looks like a ten-metre carry into a fifty-metre one. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The way out is measured with the way in. The distance from the standing to the actual kitchen door is the number that counts, since plenty of drives finish at a side gate and a garden path. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. A one-hour window will not hold a two-way job.

Not to any real extent, and it would be easy to imply it was. What the research on this patch actually lists is worktop installation and worktop fabrication. It describes the kitchens on this patch, not the work that goes into them. Same quoting, same cutting, same fitting as anywhere else on the patch. Where a family has been living around a building site for months, the finish date carries more weight than any other part of the specification. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. Booked at short notice, because the notice is short. An open-plan extension puts the worktop in the middle of the living space, so it is looked at from the sofa as well as worked on. The carcasses have to be sound, because stone is several times the weight of what is coming off. Nothing else in the room has to change.

A waterfall leg is a separate piece bonded to the top on a mitre, so the floor it stands on has to be level enough for that mitre to close along its full height. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Appliance gaps are checked against the new thickness. Material sits between £110 and £550 per square metre supply only, and templating, fabrication and fitting are quoted line by line.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. We would rather find it at template than on the morning, which is why the templater looks behind the units. It is the usual surprise, and it is a known one. Have a fitter or joiner fix and level the island units beforehand, and get the sink, taps, hob and any range on site before templating so we cut to the actual appliances. An owner paying for this directly tends to want the reasoning as much as the number, so a quote that explains why a join sits where it does is worth more than a cheaper one that does not. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Nothing to reseal is the point in a let.

The bowl position has to be settled before templating, since the grooves are set out from it. A groove set needs a clear stretch of worktop beside the bowl, so it competes with the run for length instead of being free surface. Old flues run inside the wall behind the run, so a deep fixing finds a void about as often as it finds brick. Taking the old tops off is also the first honest look at what has been going on underneath them. A twenty-year-old run is replaced to its own shape.

The quote is written from the template drawing. Before that it works from what you have described. Nothing is payable until the template, and the template measures the room as it stands rather than estimating from a plan. Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. A laminate top was scribed thin at the back to swallow it, and stone cannot be shaved down the same way. It was there long before we were.

A remake goes back through the same cutting and polishing, so it is a return visit rather than a patch. Stone cannot be filled and made good the way laminate can, so a damaged piece is remade rather than patched. The workmanship guarantee runs 5 years on every kitchen we fit. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. It decides whether the old top leaves whole.

Supply through us runs £110 to £550 per square metre for the slab alone, which is the line you would be removing. Delivery to the workshop has to be arranged and dated, since nothing is nested until it is there. Extension budgets are usually well spent by the time the worktop is ordered, which is where the choice between quartz and a thinner sintered stone actually gets made. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.