Splashbacks and upstands in Poplar

Yes. Poplar is on the patch, and the postcodes we work here are E14. It is worked on our east London run, along with the rest of Tower Hamlets. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. Upstands travel in a crate and can wait on the van, which gives some flexibility a full-height panel does not. That is why they are crated the way they are. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A tower block runs one or two lifts for many floors, so a lift out of service postpones a job rather than making it harder. Dense concrete takes adhesive better than fixings, which actually suits a large bonded panel. Cut from the same slab run as the tops. Lift car height, not just floor area, decides whether a 3m piece goes up on edge or gets jointed in the workshop.

Estate roads are wide with parking courts, but many are behind bollards or resident barriers and the shopping precinct is pedestrianised, so the last stretch is often on foot. Concrete towers here have narrow original lifts with a low car height, which matters for a slab carried on edge. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Splashback panels are lighter than a worktop and far more awkward, because a tall thin piece has to be carried on edge and cannot be tilted to clear a turn. It decides panel size before anything is cut.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Ordered later from a different batch, the match is not reliable exactly where the pieces meet. Sockets final before template. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Siliconed to the worktop, never grouted.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Upstands follow the run exactly, so every internal and external corner is a separate mitred or butted piece. Joint placement is a decision, not an accident. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. It is usually what pushes a job towards a 100mm upstand instead of a full-height panel, because an upstand rides what a panel exposes. Make the wall good first, or accept the detail. Any surface trunking or conduit has to be rerouted or accepted and boxed before templating, because the stone cannot be scribed around a live conduit on site. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A 100mm upstand is the low-maintenance answer, and full-height stone is the one that has to be committed to early. Same slab run as the tops.