Worktop installation in West Hampstead

Yes. West Hampstead is on the patch, and the postcodes we work here are NW6. It is worked on our central and north London run, along with the rest of Camden. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. The day is planned backwards from the hall, and the scribing takes longer than the carry. That is the shape of the day. Replacement work here means templating over existing units, so check for out-of-level base cabinets before cutting, because decades of settlement in these blocks show up as a 10mm fall across a 3m run.

West End Lane is congested with buses and has almost no loading, so you work off the residential side streets under a Monday to Friday CPZ. Mansion blocks are commonly three or four storeys with no lift and a communal stair shared with other residents, which has to be cleared before any carrying starts. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. The fitting day is planned backwards from that point, before anything comes off the van. None of it is worked out on the doorstep.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Floors and units are protected before anything comes through the door, communal or otherwise. One visit, our own installers.