Worktop design and quotation in Clapham Junction

Yes. Clapham Junction is on the patch, and the postcodes we work here are SW11. It is worked on our south west London run, along with the rest of Wandsworth. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A flat over a shop is reached by a separate street door and a straight steep stair, and that stair is the whole access question. With little square metreage to spread them over, the cut-outs and the fixed template, fabrication and fitting lines carry the quote, so each one is listed separately rather than buried in a rate. Priced from the building, not from a rate card. For the above-shop flats plan on two shorter pieces with a deliberate joint at the sink rather than one long top, because the stair simply will not take the length.

This is one of the worst spots in the borough for standing a van, bus lanes, red route sections, and constant traffic around the station. Above-shop access is by a shared street door and a long steep stair with a landing turn at the top. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Tell us whether there is side or rear access to the kitchen from outside, and send the run lengths with a photo of the window and boiler positions. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.