Worktop replacement in Hackney Central

Yes. Hackney Central is on the patch, and the postcodes we work here are E8, E9. It is worked on our east London run, along with the rest of Hackney. Bay bookings are usually an hour or two, which is fine for unloading and no use at all as a place to leave the van for a day. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Lease conditions and the other flats in the building decide when noisy work can happen, so the fitting day has a start and a finish that are not ours to set. Lath-and-plaster and bowed brickwork mean we template for scribes rather than straight cuts, and each piece is offered up and eased in rather than dropped straight down. What is under the old top is the real question. Camera-enforced filters catch more fitters here than anything else, so drive the van route on the ground beforehand and build the longer legal approach into the day.

Mare Street has bus lanes and loading restrictions, and the surrounding grid is filtered with several streets closed to through traffic by camera-enforced gates. New blocks have service lifts and booked bays, while the older terraces mean a shared hall and a first-floor turn. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.