Worktop design and quotation in Nunhead

Yes. Nunhead is on the patch, and the postcodes we work here are SE15. It is run from the New Malden side, covering South West London & Surrey. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The rear room is generous with a chimney breast in one corner, so the run gains a return and two scribed ends whatever the plan drew. The quote separates the joins the run needs from the joins the route forces, because they are different decisions with the same price. You see it before you commit to anything. Rooms here are frequently under 2.4m wide, so the client has to be talked out of an island early or the walkways end up under 900mm.

Steeply graded streets running up towards the cemetery, narrow carriageways with parking both sides, and a lot of houses with a side alley too narrow for a slab trolley, so it is a front-door carry. Rear access usually lets us fit longer pieces whole, so the join count ends up decided by the slab rather than by the building. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop replacement. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Send us the run lengths, plus photos taken walking from the pavement through the hall to the kitchen so we can see the door widths and the stair turn. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.