Kitchen worktops in Peckham

Yes. The Bellenden-side Victorian terraces are extension country - kitchen moved into a rear infill with a 3m run against the flank and a small island or peninsula - while the estate flats and warehouse-style conversions to the north stay galley-shaped with a single run and a tall bank. A controlled parking zone means either a visitor permit sorted in advance or a suspended bay, and a suspension is applied for days ahead rather than on the morning. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact.

Georgian terrace pockets, Victorian bay-front terrace, 1960s and 1970s estate and 2010s conversion of light industrial. A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. Walked, measured, protected, then lifted.

Tight terraced streets with permit bays, a lot of skips and builders' vans competing for kerb, and rear access rarely usable because gardens back onto other gardens rather than a lane. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Worktop templating, worktop installation and worktop design & quotation, in that order. Batching several kitchens together is the one situation where buying a whole slab is cheaper per kitchen rather than more expensive. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Half these jobs land mid-build with the extension still drying out, so template late and check the plaster is on before you cut.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.