Worktop design and quotation in Wood Lane

Yes. Wood Lane is on the patch, and the postcodes we work here are W12. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Timber-frame construction with plasterboard linings means every fixing has to find a stud, and a peninsula end needs proper support built in beforehand. Runs are short enough that a small U or galley often comes out of one slab with good yield, which means the material band you pick (£110-£550/m² supply only) is doing most of the work in the total, not the shape of the room. That is what the itemised lines are for. Curved facades mean some back edges are genuinely not straight - digital template it rather than trusting the drawings the developer hands you.

Every building is managed, with a loading bay booked through the concierge, a contractor induction and a goods lift that has to be reserved in a time slot. Wood Lane itself carries heavy shopping-centre traffic with bus lanes and restricted stopping, and basement service yards have height barriers that rule out a high-roof van. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Nothing payable until we template.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Nothing payable until template.