Lumen Solo GunMetal sink
Lumen Solo GunMetal dimensions diagram

Manufacturer's photograph and dimensions diagram, in millimetres. Tap either to enlarge.

Lumen

Lumen Solo GunMetal

Stainless steel

£190

Nothing is charged on this site. The basket is saved on this device. View basket

Specifications

Category
Kitchen sinks
Type
Stainless steel
Brand
Lumen
Condition
New
Price
£190 each, delivery confirmed for your postcode
Overall size
530 mm wide, 430 mm front to back (±2 mm)
Bowls
Single bowl
Bowl size
500 × 400 mm, 200 mm deep (±3 mm)
Minimum base unit
550 mm
Mounting
Undermount
Waste outlet
90 mm

Fitting the Lumen Solo GunMetal into a stone worktop

We can cut the sink cut-out to match this one exactly. Buy it before we template, and it gets dry-fitted to your stone in the workshop rather than trimmed on site.

Get a quote

Delivery

Nothing is charged on this site and you will not be asked for card details here. Send us the basket and we confirm the delivery cost against your postcode and the item, in writing, with a way to pay. We would rather tell you the real cost than publish a flat rate that turns out not to cover your address. If your worktop is being fitted by us, it can come with the stone instead.

Returns

Your statutory right to cancel an online order applies. Email info@worktopworx.co.uk or call +44 7830 847489 and we will confirm the return arrangement in writing before anything is collected. Once a bowl has been cut into a worktop it obviously cannot go back, which is why we ask you to be sure before templating.

This range in other finishes: Lumen Solo

Same finish, other ranges: GunMetal

Questions

Buying the Lumen Solo GunMetal

Looking after it

Follow the maker’s care instructions for the bowl. As a general guide, steel shows water spots and fine scratches, and a brushed finish hides both better than a mirror polish. Whatever you use on the bowl, keep it off the stone around it unless it is safe for the worktop as well, and look under an undermount sink every few months, because the seal beneath it is invisible from above.

How to clean a composite or stainless steel sink

01

How much is the Lumen Solo GunMetal sink?

£190, as listed. Support bars for an undermount bowl are £60, ordered with it. Delivery is confirmed for your postcode before you pay, and the cut-out in the stone is itemised on your worktop quote.

02

Can you cut this sink into a stone worktop?

Yes. A sink cut-out is machined in the workshop from your template, not on site, and its corners are radiused rather than cut square, because a sharp internal corner in stone is a stress point. Your sink is then dry-fitted into the cut stone before anything comes to site.

03

Should I buy the sink before you template?

Yes. The sink must be physically in your kitchen before we template. Its opening is set out from the sink itself, because two sinks with the same catalogue name can differ in corner radius and flange depth. Order it before the template visit and the cut-out is made to that exact bowl.

Also in the range

More kitchen sinks

A short range on purpose: sinks and taps we can cut and seat in stone.

See all kitchen sinks

Next step

The bowl is the easy part

What decides how it looks is the aperture, the radius on the corners and how the stone is supported around it. Send us the kitchen and we will price the lot in writing, fitted 5–10 working days from template.