Black Laurent run down the length of a home bar under green cove lighting, bottles racked behind and a herringbone floor

Sintered stone worktops in London

Supplied, fabricated & fitted by Worktop Worx

8 colours
  • 5.0 from 35 Google reviews
  • 25-year material · 5-year workmanship
  • Fitted 5-10 working days from template

Get a fixed quote

8 sintered stone colours, supply only from £280 to £300 per square metre, most between £280 and £300; fabrication, cut-outs and fitting are quoted per kitchen after templating.

If sintered stone is new to you, start with what sintered stone is and how it differs from porcelain.

This is our own range of sintered stone. Like any sintered surface it is fired from mineral powders with no resin in it, so a hot pan cannot scorch it and it never needs sealing. Its hardness is the point of it, and at an exposed edge it is also the thing to plan around.

Close view along the Black Laurent bar top, the gold vein running past the stools towards the timber pillar

Sintered stone is the most durable of the three: highly scratch and heat resistant, and thin enough to take a fine mitred edge.

Effectively zero porosity. Never needs sealing. On heat, nothing in it can scorch, so a hot pan does no harm.

Sintered stone worktop colours by tone and supply price per square metre
ToneColoursSupply fromSupply toExamples
Marble effect7£280/m²£300/m²Aurea Stone, Aurelia, Black Laurent
Gold & warm1£280/m²£280/m²Sahara Stone

Supply only: the slab. Fabrication, edges, cut-outs and fitting are itemised on the written quote for your kitchen.

Supply rates from our published price list, last revised 19 November 2026.

Supply cost

What the slab costs for five common kitchens

Each layout at three rates: the entry rate, set by Aurea Stone at £280/m²; the median; and the top rate, set by Tivoli Stone at £300/m².

KitchenEntry: Aurea Stone (£280/m²)Median: Calacatta Alba (£280/m²)Top: Tivoli Stone (£300/m²)
Single run 3.6m (2.16 m²)£605£605£648
L-shape (2.82 m²)£790£790£846
Galley (3.60 m²)£1,008£1,008£1,080
U-shape (3.72 m²)£1,042£1,042£1,116
L-shape + island (4.44 m²)£1,243£1,243£1,332

Supply only: the slab at its published rate per square metre times the worktop area, 600 mm deep with corners counted once. Templating, fabrication, edges, cut-outs and fitting are itemised on the quote for your kitchen.

Supply rates from our published price list, last revised 19 November 2026.

How sintered stone behaves in a kitchen

Porosity

ZeroEffectively zero porosity

Sealing

NeverNo sealant schedule, ever

Heat

ExcellentNothing in it can scorch

What it is

How sintered stone is made

Sintered stone starts as a blend of mineral powders, the same raw materials found in glass, porcelain and natural stone. The blend is compacted under very high pressure, then fired at high temperature so the particles fuse into a single dense body. No resin is involved anywhere in the process.

Because there is no resin, there is nothing in it that a hot pan can scorch. And because it is fired as one dense body, porosity is effectively nil. The large slab format also means fewer joins on a long run, and patterns that can be book-matched across an island.

In our catalogue

8 sintered stone surfaces

Every figure above is supply only: the slab, before fabrication, edge profiles, cut-outs, delivery and installation. Those are itemised separately on your written quote so you can see what each choice costs.

Supply price range
£280 – £300/m²
Most sit between
£280 – £300/m²
Colour tones
2

How it behaves

Heat, staining, sealing and wear on sintered stone

The four things that decide whether you are happy with a worktop in five years' time.

Durability & scratching

The hardest surface we fit, and the most forgiving in daily use. It resists scratching better than quartz or granite, and it is genuinely difficult to mark with normal kitchen tools.

Hardness has a cost. A very hard material is a brittle one, so impact resistance at thin, unsupported edges is its weak point rather than surface wear. Fabrication technique matters more here than with any other material: corners eased, overhangs supported, cut-outs radiused and never squared off.

Heat

Excellent. There is no organic binder to scorch, so hot cookware straight off the hob is not a problem. It is also why sintered slabs get used for fire surrounds.

Staining & porosity

Effectively zero porosity, which makes it the most stain-resistant surface of the three. Wine, oil, ink and coffee sit on the surface and wipe away. It also handles cleaning products that would attack a quartz resin, though a stone-safe cleaner is still the sensible habit.

Sealing

None, ever. There is nothing for a sealer to soak into.

Thickness

Sintered slabs are produced in a range of thicknesses, including options thin enough for wall cladding and fine mitred edges, which is exactly why designers reach for them when they want a slim worktop profile. Available thicknesses vary by colour and finish, so we confirm them for your chosen slab at quotation.

Whatever the slab thickness, a mitred edge folds the surface down at 45 degrees so a thinner slab reads as a deep one with the pattern running unbroken round the corner. See the edge profiles.

Who it suits

Outdoor kitchens, sun-filled rooms, slim mitred edges, and anyone who wants the most durable surface available and will accept a careful approach to edges.

If that does not sound like your kitchen, say so when you send us the plans. We fit all three families and we are not paid more for one than another, so the advice you get back is the advice we would give a friend.

The honest part

Where sintered stone is the wrong choice

Three things a showroom will not lead with. If any of them describes your kitchen, tell us and we will point you elsewhere.

Chipping at thin edges

The honest weakness. A dropped pan on an exposed thin edge, or a knock on an unsupported overhang, can chip it. Repairs are harder than on quartz because the body of the slab can be a different colour to the printed surface, so a chip can show through as a contrasting mark.

Fabrication is unforgiving

It is harder on tooling and less tolerant of a rushed cut-out than quartz. That is a reason to care who fabricates it, not a reason to avoid the material. But it is why the cheapest quote for sintered stone is rarely the one to take.

Some finishes show marks

Matt and textured finishes can show fingerprints and residue more readily than a polished surface, particularly in dark colours. Worth seeing a dark matt finish in ordinary kitchen light, not under bright display lighting, before committing a whole island to it.

Worth reading

Before you decide on sintered stone

The questions people actually ring us about, answered properly rather than in a specification table.

Baltic Brown granite worktop surface

By borough

Sintered stone across London

The stone does not change, but the kitchens do. The borough pages take sintered stone through what each borough's housing stock actually is: the carry, the walls, and what moves the price there.

Branco Piracema granite worktop surface

Sintered stone: common questions

01

How much do Sintered stone worktops cost?

We fit 8 sintered stone colours, supplied from £280 per square metre (Aurea Stone) to £300 (Tivoli Stone). Most sit between £280 and £300. That is the slab only: fabrication, edges, cut-outs and fitting are itemised on the written quote, after we have seen your kitchen.

02

Is this sintered stone made by Cosentino?

No. This is our own range of sintered stone: ultra-compact surfaces made by compressing mineral powders under enormous pressure and heat. Cosentino makes its own sintered stone and sells it under its own name. Both are sintered stone, so the material facts are the same: no resin to scorch, effectively zero porosity, and never any sealing.

03

What are the downsides of Sintered stone worktops?

The catch is what hardness costs you at an edge. A dropped pan on an exposed thin edge, or a knock on an unsupported overhang, can chip it. Repairs are harder than on quartz because the body of the slab can be a different colour to the printed surface, so a chip can show through as a contrasting mark. It is harder on tooling and less tolerant of a rushed cut-out than quartz, which is why the cheapest quote for sintered stone is rarely the one to take.

04

Can you put a hot pan on a Sintered stone worktop?

Yes. There is no organic binder to scorch, so hot cookware straight off the hob is not a problem. It is also why sintered slabs get used for fire surrounds.

05

Does sintered stone stain, and does it need sealing?

Effectively zero porosity, which makes it the most stain-resistant surface of the three. Wine, oil, ink and coffee sit on the surface and wipe away. It also handles cleaning products that would attack a quartz resin, though a stone-safe cleaner is still the sensible habit. It never needs sealing: there is nothing for a sealer to soak into.

06

What is the hardest-wearing worktop?

Sintered stone. The hardest surface we fit, and the most forgiving in daily use. It resists scratching better than quartz or granite, and it is genuinely difficult to mark with normal kitchen tools. Hardness has a cost. A very hard material is a brittle one, so impact resistance at thin, unsupported edges is its weak point rather than surface wear.

07

How many sintered stone colours do you fit?

8: Aurea Stone, Aurelia, Black Laurent, Calacatta Alba, Desert Crema, Sahara Stone, Portland Limestone and Tivoli Stone. Every one is listed on this page with its supply price.

08

How can I see sintered stone before I choose?

Sintered stone is best judged at full size: its large-format veins are laid out across the whole slab, which no thumbnail or preview can show. We can arrange for you to see the slab your worktop will be cut from before anything is cut.

09

How long does fitting take?

Worktops are fitted 5 to 10 working days from template. The clock that matters only starts when we can template, once the units are in and level.

All common questions

5.0 from 35 Google reviews

Every one of these is on our Google profile under the reviewer’s own name. Nothing here is written by us, and the link goes straight to the source.

Read all 35   See them on Google

Count as read from Google on 13 November 2026

★★★★★
“We recently had our kitchen worktops supplied and fitted by Worktop WorX using Laurent Gold sintered stone, and we couldn’t be happier with the result. The finish, quality, and attention to detail were outstanding from start to finish. Karem was incredibly helpful throughout the whole process professional, knowledgeable, and always available to answer…”
Gabriel TivadarGoogle review · Laurent Gold sintered stone
★★★★★
“I used Karem’s services 5 years ago for purchasing and fitting the quartz worktop in my then brand new kitchen. The price was reasonable and the service reliable and spot on, no delays in fitting, misunderstanding or excuses. I recommended him to a friend, who also used his services and they were happy too! If I need to order new kitchen work top again,…”
shoshencenceGoogle review · Quartz
★★★★★
“Absolutely delighted with our new worktop from Worktop WorX. The Capri White finish looks incredible, clean, modern, and really brightens up the whole kitchen while pairing beautifully with the darker cabinetry. The quality of the worktop is outstanding, with a flawless finish and seamless installation that really shows the attention to detail. It’s not…”
Dawid MyszorGoogle review · Capri White
★★★★★
“Kareem did the countertops dur8ng my kitchen remodel, and I was so impressed that I had him back to do the laundry room as well, which tells you everything you need to know. He is an absolute gem. Shows up when he says he will (which, let’s be honest, is rarer than it should be), does beautifully work, and clearly takes real pride in what he does. The…”
Susie WigginsGoogle review
★★★★★
“We recently had a Calacatta Gold worktop installed by Worktop Worx and are really pleased with the result. It has completely transformed our kitchen, much brighter, modern, and high-end compared to our old wooden surface. The team were professional, efficient, and the finish is excellent with great attention to detail. The worktop looks amazing and is…”
RO74 TVXGoogle review · Calacatta Gold
★★★★★
“We recently had the Arctic Starburst worktop installed by Worktop WorX and it looks amazing. The subtle sparkle really catches the light and gives the kitchen a clean, modern feel. The Arctic Starburst surface feels high quality, durable, and is easy to keep clean. The finish and installation from Worktop WorX were spot on. Really happy with the result…”
Han LeeGoogle review · Arctic Starburst

9 of our 35 Google reviews name Karem, who owns and runs Worktop Worx.

Send us the kitchen and we will price it properly

Plans, a sketch or photos with rough measurements is enough to start. After templating you get a fixed written quote with every cut-out and edge itemised, and installation 5–10 working days from template.

Not sure this is the right material? Tell us how the kitchen gets used and where the light falls. If sintered stone is wrong for it, we will say so before you have spent anything.

+44 7830 847489 · 5.0 from 35 Google reviews

Get a fixed quote