Kitchen worktops in Kilburn

Yes. Dense flat-conversion territory where kitchens are small, often windowless internal rooms or one end of a through-lounge, so a 2.4m single run with a slim breakfast bar is the standard. Landlord-driven refurbishments are frequent, which means durable, plain material and quick turnaround rather than statement stone. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. One trip is always better than three.

Victorian terrace, Edwardian mansion flat and 1960s-70s council block. A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. Lath-and-plaster on the party wall and the chimney breast returns almost never runs true, so a 100mm upstand bedded on silicone is the honest answer here — it rides the bow and hides the junction the worktop can never close on its own. Cut from the same slab run as the tops.

Kilburn High Road is red-routed with no stopping in daytime, side streets are permit-only and full, and most flats are up one or two flights of a shared Victorian staircase. Loading dispensations and early starts do most of the work here. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. Where the route is tight we break a long splashback at a natural vertical joint instead of forcing one panel through. It decides panel size before anything is cut.

Worktop replacement, worktop templating and worktop splashbacks & upstands, in that order. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn. Nothing longer than about 2.4m gets round the staircase turns in these conversions, so design the joint into the sink run before the slab is cut.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Carcasses have to be sound first. Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. We would rather find it at template than on the morning, which is why the templater looks behind the units. Found at template, not on fit day. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The template happens when the units are in, fixed and level, whoever is fitting them. Appliances on site, not on order. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.