Hammersmith and Fulham
Dekton & sintered worktops in Hammersmith and Fulham
We cover 22 neighbourhoods in Hammersmith and Fulham — Fulham Reach, Hammersmith and Hurlingham among them — across 5 postcode districts. Templating and fitting are done by our own team, so the same people measure the room and install the stone.
The housing here
What Hammersmith and Fulham's stock means for sintered stone
Taken across the whole of Hammersmith and Fulham, 55.9% of the housing was already standing before 1919, among the highest in London. 24.6% of homes sit in converted or shared houses, among the highest in London.
55.9%
Standing before 1919
of the housing
2nd of 33 London boroughs, highest first
24.6%
Converted or shared houses
of homes
2nd of 33 London boroughs, highest first
Standing before 191955.9%
The old scullery run against the outside wall usually still holds the waste, so the sink position is inherited. An inherited cut-out is still a slow cut-out in this material. Priced from the machining as well as the area, and both are shown.
Converted or shared houses24.6%
Conversions combine a bad carry with an awkward room. Sintered handles the first well; the second is a templating job either way. It moves the machining time more than it moves the material cost.
Our sintered stone runs from £250 to £300 per square metre for most of the catalogue, with 65 colours in the range. On rooms this size the number is set by slab yield: how many pieces come out of a slab, and whether an island needs a second one. Square metreage is the last thing we work out, not the first.
£250–£300/m²
Where most of the catalogue sits, supply only. Fabrication, edges, cut-outs and fitting are quoted on top.
65 colours in the range
- Heat
- Excellent (nothing in it can scorch)
- Porosity
- Effectively zero porosity
- Sealing
- Never needs sealing
Tones
We cannot post sintered stone offcuts, so samples are the quartz range only. The template is taken in your kitchen and the stone is fitted there too.
Questions
Dekton & sintered in Hammersmith and Fulham
Will sintered stone sit properly against the old walls in a Hammersmith and Fulham kitchen?
Yes, provided it is templated and not estimated. Walls this age are rarely straight, so the wall line is cut from a physical template taken after the units are fixed and level. That is why we do not quote a worktop from a floor plan.
Our flat is a converted house — does that change the sintered stone worktop?
It changes the piece list more than the material. Conversions give you stairs that turn and rooms that are rarely square, so we template after the units are fixed and plan any join around the carry. The specification stays the same; how it arrives does not.
Do you cover the whole of Hammersmith and Fulham?
Yes — 22 neighbourhoods across 5 postcode districts, Askew Road, Barons Court, Bishop's Park and Brook Green among them. There is nothing to visit: the template is taken in your kitchen and the stone is fitted there by the same team.
Other surfaces
The same kitchens, in something else
The housing does not change, so most of what is on this page still applies. What changes is weight, machining and maintenance.
Worth reading
Choosing sintered stone
Neighbourhoods