Worktops in Cranbrook

Yes. Cranbrook is on the patch, and the postcodes we work here are IG1. It is worked on our east London run, along with the rest of Redbridge. A step up from the drive to the threshold turns the last two metres into a lift, and a lift is where two pairs of hands become the minimum. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. A figured slab takes longer to match than a plain one. The work comes to you. We template in your kitchen and fit in your kitchen, with nothing to visit or collect.

A range sitting in a chimney recess is common, and the flanking pieces are cut with the manufacturer clearance built into the template. A kitchen of this size runs to two slabs almost every time, and once a second slab is in the quotation the question shifts from rate per square metre to which slab you actually want to live with. A galley nests efficiently and frees money for better stone. Old breasts carry a bulge low down where the original opening was closed up, and the units stand off it before the stone is measured at all. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. The narrowest return in the kitchen is its weakest stone.

An inward-opening door swinging back against the wall leaves less clear opening than the frame measures, and a storm porch in front of it is tighter again. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Pattern is carried across a seam on the bench, never by eye on site. Where the van cannot turn on the plot it has to arrive already facing the right way, so the approach along the street is part of the plan. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Stone is delivered machined, sealed and covered, in that order.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop installation and worktop replacement. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Movement across three metres is not visible on a hand sample. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. A repeated specification is worth deciding slowly, once.

Island units are rarely fixed to anything at first fix, so they get screwed to the floor and levelled against the perimeter run before the stone is measured at all. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Depth beyond the standard is a slab question, not a trim question. The material band is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Two alcove pieces will not swap over however similar they look, so they are marked left and right at the bench and stay that way to the van. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Porous or sealed is a decision about the next ten years. Send the island dimensions and the perimeter run lengths, say whether a waterfall end is wanted, and tell us which slab you would like reserved. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Staying put and selling on ask different questions of a stone.

Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. Units have to be fixed down as well as levelled. A loose carcass moves under stone. A sloping floor is not the problem. The plane the unit tops finish in is. A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. A short upstand shows a fragment of pattern, never a run of it.

Every run, cut-out, edge, join and groove set is a line, which is what makes it comparable with anyone else’s. Ask for the lines rather than the total. One number for a kitchen tells you nothing you can check. The design and quotation visit is free and carries no obligation, so a figure exists before any commitment. Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. A deep scribe eats into the back of the piece, which is quietly important on a stone with directional figure, since the pattern moves backwards as that depth comes off. Reach across an unsupported span is a thickness question.

Grooves and an undermounted bowl are usually specified together, since the grooves are run to the bowl edge. The bowl position has to be settled before templating, since the grooves are set out from it. On a porous stone the grooved area is sealed with the rest, and it gets wet more than anything else. A lantern or a rooflight over the room throws raking light across every horizontal surface, which shows a lipped join from the far side of the kitchen. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Two kitchens of one size can differ by double on the stone alone.

Socket and switch positions have to be final before templating, because the openings are machined rather than chopped out on the wall. Tiling and stone can meet, but where they meet is decided before the template rather than after. Stone up a wall is heavier than tile and bonded rather than hung, so the wall has to be sound. The kitchen is generally a rear extension or a knocked-through pair of rooms, so part of the perimeter is old wall and part of it is new. There is usually an island, and the island takes the liveliest part of the stone while the perimeter is allowed to stay quiet, which is a decision made at the slab rather than on paper. Plain stone takes the seam that a long carry forces.