Worktops in Forest Hill

Yes. Forest Hill is on the patch, and the postcodes we work here are SE23. It is worked on our south east London run, along with the rest of Lewisham. A skip, a delivery lorry or a run of scaffolding takes the frontage the van needed, so the street is worth a look the day before rather than on the morning. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. Remnants become chopping boards, hearths and window boards. There is nothing to drive to and nothing to pick up, because both visits are to the property itself.

These kitchens are big rooms with long perimeter runs and an island, so level has to hold across the whole floor rather than along one wall. There is usually an island, and the island takes the liveliest part of the stone while the perimeter is allowed to stay quiet, which is a decision made at the slab rather than on paper. Even light lets a mid-tone hold its own. The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. A short upstand shows a fragment of pattern, never a run of it.

A step up off the pavement means the piece is lifted to the threshold before it is carried anywhere, and that first lift is the one that wants four hands. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. A forced seam is a material decision before it is a fitting one. Where parking runs down both sides the road is left as a single lane, and a van standing in it has to be somewhere it does not stop a bin lorry. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Colour matched resin is mixed to the slab, not to a chart.

Not particularly. It would be easy to say yes and leave it there. What the research on this patch actually lists is worktop installation and worktop fabrication. That is about what people have here rather than how it gets done. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Several units in one building are fitted out to the same drawing, so an error on that drawing is an error repeated in every flat. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. The cheapest stone we fit is sintered, and it is still stone. A converted flat is measured off the original house, so no two units in the same building have quite the same kitchen run. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Batch matching is the only honest way to match a surface.

Whether it comes off the same slab as the run behind it or needs one of its own is settled by laying both against the usable area of the slab, not by adding the metres up. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Long unbroken lengths are what make a plain stone look dear. Reckon on £110 to £550 per square metre for the material supply only, with templating, fabrication and fitting itemised separately.

An alcove is commonly wider at the back than at the front, so a piece cut to the opening drops in and then stands off the rear wall. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Reach across an unsupported span is a thickness question. Send the island dimensions and the perimeter run lengths, say whether a waterfall end is wanted, and tell us which slab you would like reserved. A quartz sample left on the counter for a week under the actual kitchen lights settles more arguments than any showroom, and an owner is the only person in a position to do that. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Twenty five years on the material, five on the workmanship.

Which side of the bowl they go is about how you stand at the sink, and it is settled before cutting. Grooves and an undermounted bowl are usually specified together, since the grooves are run to the bowl edge. The alternative stands on the surface, so the choice is losing worktop permanently or only while you are draining. There is usually a cellar head or a hatch somewhere in the floor, and whatever sits above it has to stay liftable. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Porous or not porous is the fork in the road on day one.

A remade piece is cut from the same slab run wherever the slab allows, because a replacement from another batch will not match across a join. The workmanship guarantee runs 5 years on every kitchen we fit. The rest of the kitchen still goes in. One damaged piece does not hold up the pieces either side. A Victorian hall arch sits lower than the ceiling either side of it, and it is the point a piece carried on edge meets first. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Quiet stone closes a joint; dramatic stone announces it.

Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. Day to day all three want soap and water; abrasive creams and scouring pads are what dull a polished surface. Marble is the one people underestimate. It is porous, like granite, and wants sealing. Original walls are thick, lime-plastered and rarely straight, which makes dry-laying and scribing the bulk of the fitting day. Kitchens of this size nearly always run to two slabs, and once a second slab is in the quotation the question changes from price per square metre to which slab you actually want. Save on the colour before you save on the thickness.

We seat and seal the sink and hob on the day; water, waste, gas and electrics are for your plumber and electrician. A boiling tap needs a hole of its own and a cupboard below for the tank, so the units change too. Nothing is cut out in the kitchen. Cutting a bowl on site is how worktops get cracked. The offcut taken out of the middle for a hob is a large usable piece, and it is worth deciding early whether it becomes an upstand or goes in the skip. An island is the piece that decides whether one slab covers the kitchen or two, and a second slab arrives as a step in the figure rather than a gentle slope. The number follows the layout far more closely than the floor plan.