Worktops in Selhurst

Yes. Selhurst is on the patch, and the postcodes we work here are SE25. It is worked on our south London run, along with the rest of Croydon. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. What stands on the van is finished stone, not raw slab. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A top-floor conversion puts part of the kitchen under the slope of the roof, so the wall behind the run stops at head height along one side of the room. Alcoves either side of the old breast chop the run into short lengths, and a kitchen made of short lengths is the case where buying a slab outright beats buying the square metres, because the remainder is paid for in both. The island earns the liveliest part of the stone. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. A tight inside corner is where brittle material gives up.

Where the garden is level and the back door is wide the pieces get staged outside on trestles and brought in one at a time as the fitters are ready for them. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Quiet stone closes a joint; dramatic stone announces it. A market day closes the street to traffic for the morning and hands it back in the afternoon, which moves the visit rather than cancelling it. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Nothing about the shortlist is decided on the day itself.

Not really, and there is no sense dressing it up. What the research on this patch actually lists is worktop replacement and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It gets quoted, cut and fitted exactly as it would anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Where the cooking is serious, heat tolerance leads the list. Several units in one building are fitted out to the same drawing, so an error on that drawing is an error repeated in every flat. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Order the stone against the room, never against the drawing.

Where a run finishes hard against a wall the last few millimetres are scribed, and where it finishes in open floor it is cut square and polished, which is two different jobs on one length. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. The number follows the layout far more closely than the floor plan. Material sits between £110 and £550 per square metre supply only, and templating, fabrication and fitting are quoted line by line.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. The wall decides the scribe and the scribe decides the depth. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Whoever holds the keys later is the one who needs the paperwork.

The same firm templates and fits. Nobody else is brought in to install. No payment is due before the template. Upstands and splashbacks are templated after the worktop is down and settled, so they are a separate visit. The back addition is frequently a single skin of brick rendered on both faces, which takes a fixing badly and moves with the weather. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Two kitchens of one size can differ by double on the stone alone.

Cut-outs, edge profile and join count are itemised, so taking one out removes a line rather than starting an argument. Taking the old tops away is a line rather than an assumption, so it comes off if you do not want it. Ask for the lines rather than the total. One number for a kitchen tells you nothing you can check. A live soil stack cannot be chased back into the wall, so the depth it steals is permanent and the run is planned around it rather than through it. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. Sealing suits stone that drinks; nothing else needs it.

Stone cannot be filled and made good the way laminate can, so a damaged piece is remade rather than patched. The rest of the kitchen still goes in. One damaged piece does not hold up the pieces either side. The workmanship guarantee runs 5 years on every kitchen we fit. Grass and gravel will not take a loaded trolley, so a boarded track gets laid from the gate to the door before the first piece moves. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Thin sintered stone weighs about half what thick granite does.

Ordered later from a different batch, the match is not reliable where the two pieces meet. An upstand is a slim strip that follows the worktop up the wall; a full-height splashback runs from the worktop to the underside of the wall units. If it is a decision for later, say so at the template: the match is a question about the batch. The flat below hears the floor more than the walls, so lifting boards to move a waste run is a conversation with a neighbour before it is a morning of work. Rooms in these houses run long and narrow with the only honest daylight at the garden end, so a pale honed surface does more for the working half of the kitchen than any colour with depth in it. Movement needs length, and length is what these rooms have.