Worktops in Foots Cray

Yes. Foots Cray is on the patch, and the postcodes we work here are DA14. It is worked on our south east London run, along with the rest of Bexley. The distance from the standing to the actual kitchen door is the number that counts, since plenty of drives finish at a side gate and a garden path. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. Stone arrives finished, because a kerb is not a polishing shop. Your part of it happens entirely at home, with nothing to travel to and nothing to bring back.

Many have had the ground floor chimney breast removed to gain three hundred millimetres, and the gained strip is newer blockwork standing proud of the old plaster. The kitchen in one of these sits in the back addition and takes its daylight from one end, so the working half of the run is the darker half and a pale stone with a honed or matt face does more there than any colour with depth in it. Long narrow rooms want a pale face at the working end. Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Movement in a stone needs length to read as anything at all.

Booked delivery windows on a managed estate run to an hour, and a worktop install does not happen inside an hour. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Flexing a porcelain length round a turn is how one breaks. Deep gravel takes the wheels of a loaded trolley and holds them, so either boards go down or the pieces are carried. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. A natural surface is sealed at the end of its own fitting day.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop replacement and worktop fabrication. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. The cheapest stone we fit is sintered, and it is still stone. Several units in one building are fitted out to the same drawing, so an error on that drawing is an error repeated in every flat. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Batch matching is the only honest way to match a surface.

The walkway between the two runs is fixed by the units either side, so any overhang added to one worktop comes straight off the space somebody has to stand in. An island is the piece that decides whether one slab covers the kitchen or two, and a second slab arrives as a step in the figure rather than a gentle slope. Yield is a property of the room as much as of the slab. The material band is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. A tight inside corner is where brittle material gives up. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Phasing works only if the second phase matches the first batch.

Where there is no room for a separate drainer, grooves are usually what gets specified instead. On a porous stone the grooved area is sealed with the rest, and it gets wet more than anything else. The grooves sit inside the depth of the top with stone left either side, so a shallow run limits them. Chimney breasts and the alcoves either side of them break the run into short pieces before anyone has drawn a kitchen. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Colour gets chosen under kitchen lights, never under showroom ones.

Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Granite is porous to varying degrees, so it is sealed when we fit it and topped up over the life of the worktop. Granite tells you when the seal wants topping up: water stops beading on the surface and starts darkening it instead. The staircase rises over the back room in a good number of these, so a sloping bulkhead sits over one end of the run and a piece cannot be stood on edge beneath it. Rooms in these houses run long and narrow with the only honest daylight at the garden end, so a pale honed surface does more for the working half of the kitchen than any colour with depth in it. Short pieces are the argument for buying a slab outright.

If the sink or hob changes after the template, the drawing changes first and nothing is cut meanwhile. A Belfast or butler sink has to be installed and at its final height before the template, because the stone is cut to sit on it. Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. Both runs are in view at the same time, so the two pieces are taken off the same area of slab and the veining is set to run the same way on each side. A mitred corner asks the pattern to turn through a right angle, which an even speckle does without comment and a marble-look stone makes a performance of. Two mitres and three lengths is bench work, not surface area.

Socket and switch positions have to be final before templating, because the openings are machined rather than chopped out on the wall. The joint between splashback and worktop is siliconed, never grouted, so it can move a little without cracking. Both are templated after the worktop is down and settled, because they are cut to the wall itself. A two-up two-down has a kitchen that was never designed to be one, so the run is short, the ceiling is low and every millimetre of depth gets argued over. The alcoves either side of a breast break the run into short pieces, and short pieces are exactly where buying a full slab outright starts to beat buying stone by the metre. A tall room carries a thick edge; a low one does not.