Worktops in Muswell Hill Fringe

Yes. Muswell Hill Fringe is on the patch, and the postcodes we work here are N2, N10. It is worked on our north London run, along with the rest of Barnet. A step up from the drive to the threshold turns the last two metres into a lift, and a lift is where two pairs of hands become the minimum. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. The film stays on the face until the last trade leaves. Nothing needs visiting and nothing needs collecting: the template is in your kitchen and so is the fit.

The lean-to roof drains into a valley gutter against the addition next door, and a long leak there shows at the head of the kitchen wall rather than on the ceiling. Alcoves either side of the old breast chop the run into short lengths, and a kitchen made of short lengths is the case where buying a slab outright beats buying the square metres, because the remainder is paid for in both. Two slabs change the question from price to preference. Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Strong daylight is an argument for a surface built to take it.

Two people will walk a two-metre piece in through a front door; the same hall with a three-metre piece wants four, purely because nobody can let go halfway. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Weight per square metre belongs to the material, not to the length. Where the van cannot turn on the plot it has to arrive already facing the right way, so the approach along the street is part of the plan. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Four quartz samples arrive by post, well before anything else does.

Not to any real extent, and it would be easy to imply it was. What the research on this patch actually lists is worktop fabrication and worktop installation. It describes the kitchens on this patch, not the work that goes into them. Same quoting, same cutting, same fitting as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Buying for hard use is a different exercise from buying for looks. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. The remainder of a slab is bought whether it is fitted or not.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. A single straight run is the cheapest stone you will ever buy. Material sits between £110 and £550 per square metre supply only, and templating, fabrication and fitting are quoted line by line.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. A deep scribe moves the pattern back along with the depth. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Sealing is a job somebody has to want to do each year.

What is quoted is what the drawing says, and the figure does not move unless the drawing does. Taking the old tops away is a line rather than an assumption, so it comes off if you do not want it. What moves the figure after templating is a change you make: a different edge, an extra cut-out, a bigger sink chosen late. A floor that falls across the depth of a run rather than along it tips the carcasses front to back, and packing the front feet changes the overhang while it fixes the level. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. Thirty millimetres bridges a gap that twenty millimetres will not.

Supply through us runs £110 to £550 per square metre for the slab alone, which is the line you would be removing. How much slab you hold matters: upstands and any remake have to come out of the same batch. Order is what matters: a slab is templated before it is cut, so an uncut slab is straightforward and one already machined for another kitchen is not. Extension work runs late far more often than it runs early, and the worktop is close to the last thing in, so the date agreed at the start is rarely the date that happens. Adding an island is what moves most of these projects from one slab to two, and that jump is the single largest step in any worktop quotation. A focal surface deserves to be seen at full size.

A groove set needs a clear stretch of worktop beside the bowl, so it competes with the run for length instead of being free surface. They are cut with a fall towards the bowl, which is why they cannot be added on site later. The alternative stands on the surface, so the choice is losing worktop permanently or only while you are draining. A cast iron soil stack runs down the outside of the rear wall, so moving the sink means a fresh penetration through solid brick. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Heat tolerance is a property of the material, not a claim about it.

Units have to be fixed down as well as levelled. A loose carcass moves under stone. A long top on units that were shimmed once and never checked is the commonest version of this, and it is cheap to fix beforehand. Where a run meets an appliance, level decides whether that appliance door still clears the stone above it. Once the carcasses are levelled the gap under the plinth varies along the run, and that varying gap is the honest record of what the floor is doing. A deep scribe eats into the back of the piece, which is quietly important on a stone with directional figure, since the pattern moves backwards as that depth comes off. A cranked piece eats more slab than the two straights it replaces.