Worktops in Rotherhithe

Yes. Rotherhithe is on the patch, and the postcodes we work here are SE16. It is worked on our south east London run, along with the rest of Southwark. Unrestricted does not mean empty, and a street that is clear at seven is usually full by nine. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. The face is uncovered once, and that once is at handover. The template happens in your kitchen and so does the fit, so there is nothing to visit and nothing to collect.

Cottage terraces have no hall to speak of and the front door opens almost straight into the room, which makes the carry easier and the protection harder. Alcoves either side of the old breast chop the run into short lengths, and a kitchen made of short lengths is the case where buying a slab outright beats buying the square metres, because the remainder is paid for in both. Cool artificial light turns a warm stone grey. Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Thirty millimetres bridges a gap that twenty millimetres will not.

Whether the kitchen sits straight ahead or off a turn at the end of the hall changes the maximum piece far more than the hall width does. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. What will not travel whole is designed to break somewhere sensible. A skip, a delivery lorry or a run of scaffolding takes the frontage the van needed, so the street is worth a look the day before rather than on the morning. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Stone arrives finished, because a kerb is not a polishing shop.

Not really, and claiming otherwise would cost nothing and mean nothing. What the research on this patch actually lists is worktop replacement and worktop installation. It reflects the local housing rather than any difference in the work. It is quoted, cut and fitted here the same way it is anywhere else on the patch. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Specify before the room is finished, not afterwards. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Repeat work rewards a single decision taken carefully.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. The island is usually the piece that opens the second slab. Supply only, material is £110 to £550 per square metre, with templating, fabrication and fitting quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. A cranked piece eats more slab than the two straights it replaces. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. One owner can take a date next week while the flat below needs three weeks of notice, so several kitchens in one building end up scheduled by the slowest permission. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Neutral mid-tones survive a change of owner better than statements.

Templating and fitting are two visits, not one, and the gap between them is when the stone is actually cut. The template is taken in your kitchen after the units are in and fixed, never before. No money changes hands before the template. The original front door is narrow and the hall is often the only way in, which puts a ceiling on the longest single piece. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Two kitchens of one size can differ by double on the stone alone.

The sink, tap and hob have to be physically in the room at the template, not merely ordered, because the cut-out is machined to the item itself. A boiling tap needs a hole of its own and a cupboard below for the tank, so the units change too. Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. An island is the piece that decides whether one slab covers the kitchen or two, and a second slab arrives as a step in the figure rather than a gentle slope. Depth beyond the standard is a slab question, not a trim question.

If you want the old top kept for a garage or a utility, say so and it stays on site. Tiling bonded to the wall behind usually comes away with the old top, so that wall is agreed beforehand. An old stone top is heavier coming out than the new one is going in, and leaves in sections. Where parking runs down both sides the road is left as a single lane, and a van standing in it has to be somewhere it does not stop a bin lorry. Sintered surfaces are the hardest of the three to machine and the messiest to cut wet, which is precisely why none of that happens on a public pavement. A natural surface is sealed at the end of its own fitting day.

Topping a seal up is a wipe-on job with a cloth. Quartz and sintered stone never need sealing: quartz is non-porous and sintered stone has effectively zero porosity. Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. Floors are suspended timber over a shallow void and have moved, so the units are packed and levelled before anything is set on them. Rooms in these houses run long and narrow with the only honest daylight at the garden end, so a pale honed surface does more for the working half of the kitchen than any colour with depth in it. Open-plan surfaces are furniture before they are work surfaces.