Worktops in Alexandra Park

Yes. Alexandra Park is on the patch, and the postcodes we work here are N22, N10. It is worked on our north London run, along with the rest of Haringey. Where the nearest legal space is a couple of streets back, the walk with each piece becomes the job, and the crew is sized for walking rather than wheeling. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. A reserved slab is a slab nobody else is allowed to buy. We come to the kitchen to template and again to fit, so there is nothing to visit and nothing to collect.

Deep original skirting is often left in behind the units, standing them off the wall, so the back edge of the stone is plotted where the carcasses actually sit. Alcoves either side of the old breast chop the run into short lengths, and a kitchen made of short lengths is the case where buying a slab outright beats buying the square metres, because the remainder is paid for in both. A low seam count is what makes a small kitchen good value. The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Speckle hides the resin line a mitre leaves behind.

Where the garden is level and the back door is wide the pieces get staged outside on trestles and brought in one at a time as the fitters are ready for them. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Weight per square metre belongs to the material, not to the length. Applying for a suspension means naming a length of kerb and a date, and moving the date generally means applying for it again. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. Cutting is done wet and extracted, never dry on a pavement.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop splashbacks & upstands and worktop installation. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. An open-plan extension puts the worktop in the middle of the living space, so it is looked at from the sofa as well as worked on. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Several kitchens at once should come off a single batch. Extension budgets are usually well spent by the time the worktop is ordered, which is where the choice between quartz and a thinner sintered stone actually gets made. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. The entry end of the range is real stone, not a compromise.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Cut-outs take material out of the piece that carries the sink. The supply-only figure for material runs £110 to £550 per square metre, and templating, fabrication and fitting are lines of their own.

A room can be out of square in both directions at once, so the wall that leans is also the wall that runs downhill, and one scribe cannot answer both. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Every notch is machined on the bench and none on site. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Matching anything later means writing down the batch reference now.

Which side of the bowl they go is about how you stand at the sink, and it is settled before cutting. They are cut with a fall towards the bowl, which is why they cannot be added on site later. Where there is no room for a separate drainer, grooves are usually what gets specified instead. Where the walls have been dry-lined over the old lath there is a void behind the board and no solid fixing until a batten is found. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Priced by the square metre, lived with by the square inch.

Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. Quartz and sintered stone never need sealing: quartz is non-porous and sintered stone has effectively zero porosity. No maintenance visit is built into the job. Soap, water, and on the porous stones a seal. These were built late enough to have a damp course and proper footings, so the front of the house is close to true and the rear addition holding the kitchen is the part that has dropped. Rooms in these houses run long and narrow with the only honest daylight at the garden end, so a pale honed surface does more for the working half of the kitchen than any colour with depth in it. Short pieces are the argument for buying a slab outright.

The check comes before the measuring rather than after, because the whole drawing is set out from that plane. Where a run meets an appliance, level decides whether that appliance door still clears the stone above it. A long top on units that were shimmed once and never checked is the commonest version of this, and it is cheap to fix beforehand. Plaster thickness varies over the height of a wall, so the line at worktop height is not the line at skirting level, and the units decide which one matters. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. Water standing daily is what makes porosity matter.

Tiling and stone can meet, but where they meet is decided before the template rather than after. Ordered later from a different batch, the match is not reliable where the two pieces meet. Stone up a wall is heavier than tile and bonded rather than hung, so the wall has to be sound. The kitchen occupies the ground floor of the addition with a garden door at the far end, so there is a second way in that is narrower than the front door and a great deal shorter. The alcoves either side of a breast break the run into short pieces, and short pieces are exactly where buying a full slab outright starts to beat buying stone by the metre. A tall room carries a thick edge; a low one does not.