Worktops in Barnes Cray

Yes. Barnes Cray is on the patch, and the postcodes we work here are DA1. It is worked on our south east London run, along with the rest of Bexley. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. The film stays on the face until the last trade leaves. We come to the kitchen to template and again to fit, so there is nothing to visit and nothing to collect.

Ceilings are high and there are usually no wall units, so a splashback runs to whatever height is decided rather than to a cupboard. A surface in a volume this size is read from across the floor, so it registers as a tone long before anybody is close enough to read a pattern in it. A galley nests efficiently and frees money for better stone. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. A deep scribe moves the pattern back along with the depth.

Concierge buildings want the goods entrance, a booked lift and proof of insurance, all of which is straightforward when it is asked for a week out. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Pattern is carried across a seam on the bench, never by eye on site. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Sintered surfaces are the hardest of the three to machine and the messiest to cut wet, which is precisely why none of that happens on a public pavement. Four quartz samples arrive by post, well before anything else does.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement and worktop fabrication. That is a point about the buildings round here, not about the job. The quoting, the cutting and the fitting are identical here to anywhere else we work. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Colour names outlive their batches by several years. Several units in one building are fitted out to the same drawing, so an error on that drawing is an error repeated in every flat. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Fitting follows template by five to ten working days.

Where the aisle is too tight the usual answer is a reduced-depth top on one side, and a 500mm run is a different cut, a different sink and a different drainer to a 600mm one. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Cut-outs take material out of the piece that carries the sink. The stone is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted separately.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Thirty millimetres bridges a gap that twenty millimetres will not. Send the island size and the perimeter lengths, tell us the ceiling and window arrangement, and say whether the pod services come up through the floor. Access is arranged through a managing agent or a scheme office rather than with the household directly, so a date gets confirmed once in writing and moving it costs a fortnight. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. The next household inherits the stone and not the taste.

Tiling and stone can meet, but where they meet is decided before the template rather than after. A full-height piece behind the hob has to allow for the extractor, so that gets settled first. Upstand or splashback, the stone is cut from the same slab run as the worktop, at the same time, so the batch actually matches. Windows are large industrial openings with deep sills, and a run finishing at one meets a reveal a full brick deep. Open volume and hard surfaces mean the worktop is read from a distance, and stone looks quite different at four metres from how it looks at arm length. Plain stone takes the seam that a long carry forces.

Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. Day to day all three want soap and water; abrasive creams and scouring pads are what dull a polished surface. Services run on the surface in these buildings, so conduit and pipework cross the wall behind the units and stand proud of it. The surface is usually an island pod standing in the middle of the floor, so all four edges are on show and the profile becomes part of the look rather than a detail. Even light lets a mid-tone hold its own.

If the sink or hob changes after the template, the drawing changes first and nothing is cut meanwhile. Where the hob lands is set out against the units and the wall behind, not off the kitchen plan. Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. An island is the piece that decides whether one slab covers the kitchen or two, and a second slab arrives as a step in the figure rather than a gentle slope. Extra depth sounds free and frequently buys another slab.

Between the template and the fit the slab is nested, cut, mitred and dry-assembled on the bench, which is work you never see and is most of the wait. On the fitting day floors and door frames are protected, joins clamped flush, sink and hob sealed. The same firm templates and fits. Nobody else is brought in to install. Ceilings are high and every surface is hard, so cutting on site carries further here than in any other kind of building. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. The cheapest stone and the dearest one share a fitting day.