Worktops in Isle of Dogs

Yes. Isle of Dogs is on the patch, and the postcodes we work here are E14. It is worked on our east London run, along with the rest of Tower Hamlets. Where parking runs down both sides the road is left as a single lane, and a van standing in it has to be somewhere it does not stop a bin lorry. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. Dry cutting quartz burns the resin and the burn does not polish out. Your part of it happens entirely at home, with nothing to travel to and nothing to bring back.

The kitchen usually sits along the internal spine of the plan with the glazing at the far end, so the run itself has no window and no daylight on it. Light is almost entirely artificial and frequently cool, which pushes warm creams towards grey and makes a genuinely neutral colour the safer choice under bulbs that are already in the ceiling. Even light lets a mid-tone hold its own. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. Water standing daily is what makes porosity matter.

Handrails, mirrors and a sloping ceiling panel all eat into the usable diagonal, and none of them appear on a lift specification sheet. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Weight per square metre belongs to the material, not to the length. With no scheme to work with there is nothing to book and nobody to ring, so the only levers left are an early arrival and a word with the neighbours. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. A honed face marks on grit, so nothing is set down bare.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement and worktop installation. That is a point about the buildings round here, not about the job. The quoting, the cutting and the fitting are identical here to anywhere else we work. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Batch matching is the only honest way to match a surface. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. The material is guaranteed for twenty five years, so choose once.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Yield is a property of the room as much as of the slab. The stone is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted separately.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Brittle stone and narrow returns are a poor pairing. Send the kitchen layout with run lengths and the peninsula projection if there is one, and tell us what the lift will take as a single piece. Flats bought out of managed stock keep the original kitchen dimensions long after the ownership changed, so the layout says very little about who is paying for the work. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Stone is a fixture and outlasts the agreement over the room.

If your own slab breaks there is no matching replacement to hand, and that is the real difference. The quote is itemised, so a job where you already hold the slab is the same job with the material line taken off it. Say what you have and where it came from before anything is booked, because thickness and batch decide what can be done with it. Extension work runs late far more often than it runs early, and the worktop is close to the last thing in, so the date agreed at the start is rarely the date that happens. Adding an island is what moves most of these projects from one slab to two, and that jump is the single largest step in any worktop quotation. Two slabs bought a season apart are two different stones.

Tiling and stone can meet, but where they meet is decided before the template rather than after. The joint between splashback and worktop is siliconed, never grouted, so it can move a little without cracking. An upstand is a slim strip that follows the worktop up the wall; a full-height splashback runs from the worktop to the underside of the wall units. These flats are built with a floating floor over a concrete slab for acoustic reasons, and it deflects slightly under the weight of a stone island. Kitchens in a block like this are compact, so the total area is modest and the material band moves the figure far more than the metreage ever does. Save on the colour before you save on the thickness.

Material is quoted supply only and templating, fabrication and fitting sit on their own lines, so it is visible which part is stone and which is labour. Cut-outs, edge profile and join count are itemised, so taking one out removes a line rather than starting an argument. What moves the figure after templating is a change you make: a different edge, an extra cut-out, a bigger sink chosen late. A live soil stack cannot be chased back into the wall, so the depth it steals is permanent and the run is planned around it rather than through it. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. What the room obstructs, the layout pays for in slab.

Between the template and the fit the slab is nested, cut, mitred and dry-assembled on the bench, which is work you never see and is most of the wait. Upstands and splashbacks are templated after the worktop is down and settled, so they are a separate visit. If the units run late the template moves, not the fit: the gap between them is fabrication. Everything arrives through one controlled entrance with a booking sheet, and a delivery that misses its slot waits. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. The surface outlasts the doors beneath it, usually twice over.