Worktops in Canonbury

Yes. Canonbury is on the patch, and the postcodes we work here are N1. It is worked on our north London run, along with the rest of Islington. A permit covering the street is permission to park rather than a space reserved on it, and on a full street the difference is the whole morning. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. Thirty millimetre stone unloads slowly and thin stone does not. There is nothing to drive to and nothing to pick up, because both visits are to the property itself.

A semi has a side passage, and whether it is wide enough to carry a piece flat and turn it in at the back door is the first thing worth measuring. The kitchen in one of these sits in the back addition and takes its daylight from one end, so the working half of the run is the darker half and a pale stone with a honed or matt face does more there than any colour with depth in it. At four metres a stone is a tone rather than a pattern. Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. A cut-out beside a notch leaves very little stone in between.

Turning a heavy piece on edge indoors needs floor space at both ends of the turn, so the hall is cleared of furniture before anything comes off the van. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. Where a break is unavoidable it goes into the quietest part of the pattern. Where the household has used up the visitor permits it gets for the year, the remaining options are a suspension or a paid bay and both belong on the quote. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. The packaging and the spent cartridges leave with the crew.

Not particularly. It would be easy to say yes and leave it there. What the research on this patch actually lists is worktop installation. That is about what people have here rather than how it gets done. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. Four samples by post settle more than four showroom visits. Several units in one building are fitted out to the same drawing, so an error on that drawing is an error repeated in every flat. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Movement across three metres is not visible on a hand sample.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Runs in view together come off adjoining areas of one slab. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Heat at the lip of an opening is the slow kind of damage. Send the run lengths, say where the sink and hob will sit, and tell us which way the room faces and what lighting is going in above the working run. Whoever manages the block controls the lift booking, the bin store and the visitor parking, and none of that sits in the gift of the household whose kitchen it is. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. Hard use by people who did not choose it points at sintered stone.

No maintenance visit is built into the job. Soap, water, and on the porous stones a seal. Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. Marble is the one people underestimate. It is porous, like granite, and wants sealing. The rear room is generous with a chimney breast in one corner, so the run gains a return and two scribed ends whatever the plan drew. Alcoves either side of the old breast chop the run into short lengths, and a kitchen made of short lengths is the case where buying a slab outright beats buying the square metres, because the remainder is paid for in both. Four visible edges make the profile part of the design.

The carry route is measured before anything is cut, so a piece that will not make the turn is split at the drawing stage rather than discovered on the day. A piece travels on edge, never flat, because on edge is how stone of that length carries its own weight. A join forced by the route still sits over a gable, so it is no poorer a join for that. Two people will walk a two-metre piece in through a front door; the same hall with a three-metre piece wants four, purely because nobody can let go halfway. Where a seam becomes unavoidable the choice of stone starts to matter, because a fine even speckle closes a joint almost invisibly and a broad vein simply will not. Pattern is carried across a seam on the bench, never by eye on site.

A sloping floor is not the problem. The plane the unit tops finish in is. Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. Packing takes up small variation. It is not there to hide something that belongs in the units. A room can be out of square in both directions at once, so the wall that leans is also the wall that runs downhill, and one scribe cannot answer both. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. The obstruction is templated as found and cut as templated.

They read strongly across a dark stone and are nearly invisible on a pale one, so look before deciding. The grooves sit inside the depth of the top with stone left either side, so a shallow run limits them. The alternative stands on the surface, so the choice is losing worktop permanently or only while you are draining. Party wall settlement pulls the floor down at one side of the room, so a long run reads level at one end and not at the other. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. What sings in a bright room can go dead in a dark one.