Worktops in Portsoken

Yes. Portsoken is on the patch, and the postcodes we work here are E1, EC3N. It is worked on our City of London run, along with the rest of the Square Mile. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. Whatever the standing allows, the stone leaves that van finished, because every edge, cut-out and internal radius is machined at the works and none of it is open to reconsideration at the kerb. A honed face marks on grit, so nothing is set down bare. Your part of it happens entirely at home, with nothing to travel to and nothing to bring back.

The communal entrance opens straight off the pavement with no lobby, so the carry starts at the kerb and turns immediately. Kitchens in this stock are small and roughly square, so the run is short, the seam count is low, and almost all of the figure is material band rather than bench time. Movement needs length, and length is what these rooms have. A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. Every notch and every scribe is machined into the piece before it leaves the works, and a hard sintered surface is the least forgiving of a tight internal corner, so one is always cut with a generous radius. The obstruction is templated as found and cut as templated.

Where a basement car park is the only way up from the parking level the carry starts below ground, and two lifts in one building rarely share the same internal dimensions. That caps the longest piece, and a run split into two lengths nests differently on the slab, which moves the yield and moves the figure with it. The protective film peels off last so the finish is untouched. A market day closes the street to traffic for the morning and hands it back in the afternoon, which moves the visit rather than cancelling it. A granite kitchen ends its day with a sealer, and a sealer wants a dry face and a quiet hour afterwards, so that hour is written into the day rather than borrowed from it. The last hour on a granite kitchen belongs to the sealer.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop installation. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. A converted flat is measured off the original house, so no two units in the same building have quite the same kitchen run. Where several kitchens are ordered together the sensible move is to take them all off one batch, because two slabs of the same name bought six months apart will not sit happily in the same building. A surface for a let flat is chosen for the next tenant, not this one. Kitchens go in near the end of a conversion, behind the plastering and the flooring, by which point the programme has already absorbed whatever slipped earlier. Volume work tends to live at the entry end of the range, and the entry end is genuine stone rather than a compromise, since the lowest supply figure we quote is a sintered surface and not a thin laminate pretending to be one. Where the cooking is serious, heat tolerance leads the list.

Both runs are in view at the same time, so the two pieces are taken off the same area of slab and the veining is set to run the same way on each side. A shape like that nests kindly on a slab, so more of what gets bought ends up on the units and the rate per square metre behaves much as the brochure says it will. Long unbroken lengths are what make a plain stone look dear. The material band is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. A hob dropped into the middle of a length puts sustained warmth at the lip of a cut-out, and an engineered surface will yellow there across ten years where a natural one takes it without comment. Movement in a stone needs length to read as anything at all. Measure the run between the walls, note the cill height above the units, and tell us the thickness of the top that is coming off. Where the provider has set the specification the material choice was made once for a great many kitchens, and the useful work is meeting it exactly rather than proposing something else on the day. That changes which questions are worth asking about the stone, because somebody staying put wants to know how a honed face marks in five years and somebody selling wants to know how it photographs next spring. A surface chosen for a photograph rarely survives the cooking.

Packing takes up small variation. It is not there to hide something that belongs in the units. Units have to be fitted, fixed and level before templating, and it is better to hear that at the template than on the fitting day. Units have to be fixed down as well as levelled. A loose carcass moves under stone. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. A run that sits under strong sun for hours every afternoon suits a surface built to be stable in daylight, because a resin-bound stone is made for indoor use and sustained sunlight is the one thing it was never designed around. A tight inside corner is where brittle material gives up.

Which side of the bowl they go is about how you stand at the sink, and it is settled before cutting. Grooves are machined into the surface rather than applied to it, so there is nothing to come loose later. Where there is no room for a separate drainer, grooves are usually what gets specified instead. Plaster over blockwork is thin and hollow in patches, so anything fixed back to the wall needs a sound spot found first. Which stone belongs on top of all that is a separate question from the building itself, and it is the one with a figure attached, because supply alone runs from £110 to £550 per square metre before a single cut has been made. Stone is bought whole and paid for whole, offcut and all.

Bleach and limescale remover harm a polished finish rather than clean it, whichever material is on the units. No maintenance visit is built into the job. Soap, water, and on the porous stones a seal. The bead where the sink and hob meet the stone is siliconed rather than sealed, and wants watching. The stair is a straight concrete flight with a quarter landing at each floor and a solid balustrade wall alongside it. Coming off a laminate top changes the thickness at the front edge, and twenty millimetres reads closer to what the room is used to than thirty ever will. At four metres a stone is a tone rather than a pattern.

The edge profile is its own line, so a shaped edge and a square one are two different figures. Cut-outs, edge profile and join count are itemised, so taking one out removes a line rather than starting an argument. Nothing is payable until the template, and the template measures the room as it stands rather than estimating from a plan. A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. A deep scribe eats into the back of the piece, which is quietly important on a stone with directional figure, since the pattern moves backwards as that depth comes off. The wall decides the scribe and the scribe decides the depth.